Honda CB750 Front Brake Master Cylinder Rebuild | Motorcycle Weak Brakes Fix | Part 24

Honda CB750 Front Brake Master Cylinder Rebuild | Motorcycle Weak Brakes Fix | Part 24 In this Honda CB750 rebuild episode, I rebuilt the front brake master cylinder on my CB750 project bike. I am building this bike to be a road-going runner, not a full restoration. #ad Here's what we used in this video (affiliate links). As an eBay Partner Network affiliate and Amazon Associate, we earn commissions from qualifying purchases: Honda CB750 front master cylinder rebuild kit: https://ebay.us/ho3KbT Oil Syringe Pump Brake Bleeder: https://ebay.us/pM4MJE Circlip Pliers: https://ebay.us/HewSNq Small Pick Tools: https://ebay.us/j8uDjF Thanks for supporting the channel! Although the master cylinder on my Honda CB750 project bike wasn’t leaking and did seem to bleed up OK, the front brake was still very weak. It was suggested that, although not leaking externally, maybe the master cylinder was leaking internally preventing it from giving maximum braking pressure. I decided to rebuild the master cylinder with a kit so that this wouldn’t be a possibility. The inside of the master cylinder did contain a lot of congealed brake fluid and there was some corrosion, so a rebuild was a good idea. I tried the reverse filling of the brake system to make bleeding simpler. It surprised me how quickly the fluid came through, and I had a little fountain of brake fluid. I did finish off with some traditional bleeding. If the brake performance isn’t better I think I will replace the brake lines next. If that doesn’t work then I may have to consider fitting a second disc and caliper and just accepting that the Honda CB750 stock single caliper and disc setup just doesn't cut it by modern standards. For more helpful how-to guides and restoration project logs, visit our blog: https://www.spannerrash.com/