INAV EdgeTX Model on the Radiomaster TX15

In this video I'm showing you a complete walk-through of my EdgeTX model setup for INAV planes. If you want to use this, all you need to do is download the model files for the Radiomaster TX15 radio from the link below and paste the INAV CLI configuration into INAV: https://drive.google.com/drive/folder... All you need to do to copy this model to your radio is to: 1. Connect the radio to your PC and open the EdgeTX Companion app. 2. Load/read the settings from the radio, and make a backup before you continue. 3. Open the appropriate .etx file in the window of EdgeTX Companion. 4. You should see both files open. 5. Drag and drop the INAV model into your radios model tab. 6. Close the provided INAV .etx file and write the settings to the radio. 7. Unplug the USB-C cable from the radio and select the INAV model. 8. Connect your plane to your PC. 9. Open INAV and paste the CLI commands from the provided .txt file. 10. Save the settings and check the the behaviour in the Receiver tab. NOTE: Always make a backup of everythiung before making any changes so that you can always go back to where you started before making changes. If you don't have BLE modules installed in your radio, the video below will show you how to add the BLE Telemetry module. Installing the BLE wireless head tracker module is exactly the same, you just select SBUS Trainer in the Hardware tab on the Radio instread of Telemetry for the UART port that you have connected to:    • Radiomaster TX16S - Adding Bluetooth and GPS!   NOTE: The video above shows the hardware setup for the TX16S, but the principle is the same for the TX15, just a different connector. I'll be making a video on this soon, so stay tuned! If you have any questions, drop them in the comments below. Hope you enjoyed the video and learned something new! Have a fun and fly safe! :)