Balancing the Camera on HeadPLUS L Bracket

Balancing Your Camera on HeadPLUS Properly balancing your camera on HeadPLUS ensures optimal performance and smooth motion control. Here’s a step-by-step guide to help you set it up. How to Attach and Balance Your Camera Align the Bracket: Make sure the channel on the bracket aligns with the lip on HeadPLUS. Place the bracket correctly and tighten the screw to secure it. Mount the Camera: Position your camera onto the screw on the bracket. Tighten the bottom screw to secure your camera firmly. Adjust Front-to-Back Balance: Check if the camera tilts forward or backward when released. If it tilts: Loosen the bracket screw. Reposition the camera to correct the balance. Tighten the screw again. Adjust Vertical Balance: If the camera cannot stay upright vertically: Loosen the connection on HeadPLUS. Adjust until you find the correct balance. Retighten securely. Using the Riser Piece (for Large Lenses): If balancing is difficult due to a large lens diameter: Attach the Riser Piece to the camera first. Then secure the camera with the Riser onto the bracket.