🔥 Why Slow Slices Beat a Quick Squeeze

Why Soft Blocks Cut Clean Pressing a soft, porous block just deforms it, while a thin blade slips between the grains and takes one clean slice. The trick is a shallow, steady draw rather than downward force, letting the edge travel instead of the material squashing. Gloved fingers anchor the block so the shape stays put, and the blade enters at a shallow angle along the curved rim. Each pass frees a single molded section, and the cut face stays smooth because the pressure stays even from start to finish. A thin, sharp blade parts the material with far less force than a thick one, which drags and tears. Holding the block steady with the other hand stops it from shifting mid-cut and skewing the line. A shallow entry angle keeps the edge tracking the curve instead of diving through the block. Drawing the blade in one smooth motion leaves a cleaner face than sawing back and forth. Gloves cut down on friction and keep grip firm when the block starts to give. Working in sections strays truer to the outline than trying to free the whole shape at once. The material these blocks are made of holds its shape only when nothing presses hard on it, so the operator reads the resistance and eases off before the block collapses. Speed comes from the edge, not the hand: a slow, confident pull separates the section while a rushed one crushes it. Once a piece comes free, its rim stays crisp and even, ready to be handled or fitted without trimming.