IJV firmware 6 basics 1/8: Start here: base, modules, keys

You have just installed IJV firmware 6: this is where to start. How the firmware is made (a base that is always there, and the modules you choose), what every key does, and the four ways to press a key. In this part: The base and the modules: the modules live in a warehouse inside the radio, four are ready at the same time MENU means yes, EXIT means no; the arrows go up and down Four ways to press a key: short, long (hold it a moment), F and then the key (not together: you have 1.5 seconds), F and then a long press Key 2: short writes the digit, long moves to the next VFO, F then 2 shows two lines, F then long 2 starts the watch Hold F: key lock Side keys, as from the factory: squelch up and down; hold the first one for the monitor, hold the second one for the list of the presets Chapters: 0:00 Start 0:15 The base and the modules 0:35 The warehouse 0:54 Switch on 1:34 Four ways to press a key 2:01 One key, four jobs 2:34 Key lock 2:45 The side keys 3:13 To sum up The basics, 8 short videos: 1. Start here: base, modules, keys 2. The main screen, sign by sign 3. Choose a frequency, three VFOs 4. The menu 5. Transmit, power, repeaters 6. Memories and groups 7. The scan, its list, the presets 8. The modules The special functions have their own series. Not installed yet? Install firmware 6 from zero:    • Install IJV firmware 6 from zero: account,...   The radio screens come from the firmware itself. The signals in the examples are simulated. The radio drawn in the video has the keys of the UV-K5. On the UV-K1 the two arrow keys are in swapped positions: what each key does is the same. Manual: https://www.ijvradio.com/manual/v6/en/ Subtitles: turn on CC and pick your language with auto-translate.