Won't stop running! - Generac GP3300i (Model #G0071532) Generator

Parts and tools used in this video: • Screwdriver, Multimeter, Alligator Test Clips, Heat Gun This troubleshooting journey begins with a brand-new Generac GP3300i inverter generator that starts and runs fine, but completely fails to shut down when the power switch is flipped. After pulling off the front and side service panels, the initial diagnostic step involves testing the dashboard switch for continuity to confirm whether the electrical signal is breaking properly. When the panel switch checks out, the diagnosis shifts deeper into the unit's wiring harness and ignition system. Tracing the kill circuit reveals a loose and unclipped connector down at the ignition module. Once securely plugged back in, retested, and reassembled with verified oil levels and electrical output under a heavy heat gun load, the generator is restored to factory-fresh reliability. WHAT WE COVER IN THIS VIDEO: 0:00 The Problem: Generator Won't Shut Off 1:03 Removing Panels and Accessing Internal Wiring 5:11 Testing Dashboard Switch Continuity 11:07 Discovering the Loose Ignition Module Connection 12:27 Reassembling Panels and Checking Oil Level 18:41 Final Load Test, Voltage, and Frequency Check If you find this video helpful, consider liking the video, subscribing, and leaving a comment. It really helps support the channel and lets me know what equipment you’d like to see repaired next! #Generac #GeneratorRepair #SmallEngineRepair #InverterGenerator