DIY ESP8266 Pedal Assist for eBike controller with no PAS

You may have an eBike controller without a Pedal Assist system. If you have a Home Assistant running at your house and if you have a ESP-module (ESP8266, ESP32 etc). You can easily make a programmable DIY Pedal Assist System using ESPHome firmware and my YAML code! See how to flash ESPHome firmware:    • How to flash ESPHome on Linux | esphomefla...   YAML CONFIG: esphome: name: pas platform: ESP8266 board: d1_mini on_boot: priority: 850 then: output.set_level: id: pwm_output1 level: 0% wifi: ssid: "XXXXX" password: "XXXXXX" manual_ip: static_ip: 192.168.3.117 gateway: 192.168.3.1 subnet: 255.255.255.0 logger: api: reboot_timeout: 120min ota: sensor: platform: pulse_counter pin: D1 id: pulsesens update_interval: 1s on_value_range: below: 1100 above: 175 then: output.turn_on: pwm_output1 above: 1100 then: output.turn_off: pwm_output1 below: 175 then: output.turn_off: pwm_output1 internal_filter: 4us count_mode: rising_edge: DISABLE falling_edge: INCREMENT output: platform: esp8266_pwm pin: D5 max_power: 28% frequency: 2800 Hz id: pwm_output1 Check out these awesome websites: https://www.home-assistant.io/hassio/ https://esphome.io/ https://github.com/esphome/ESPHome-Fl... Please tell me in the comments if you have any questions. Please like and subscribe! Thanks for watching! #3lectroshocked #esp8266 #esphome #ebike #homeassistant #hassio #diyelectricbike #ebikeconversion #ebikekit