Broken & Malfunctioning Behringer Rack Unit Fix. A Capacitor Replacement Is What Most Units Need.

Many Behringer units contain the Behringer PSU2496 Power supply which is often the culprit for Behringer units that are malfunctioning, flickering, or not starting up, or not Working A lot of the time the Behringer PSU2496 Power Supply can easily be fixed by replacing its Electrolytic Capacitors. In this Video, I will demonstrate the Capacitor replacement on a Behringer V-Verb Pro reverb unit. Which is one of the Behringer devices with a PSU2496 Power Supply. The Capacitor replacement procedure in this video is valid for any Behrnigner unit that Contains the PSU2496 which includes but might not be limited to the following units. Behringer V-Verb Pro REV2496 Behringer Ultramatch Pro SRC2496 Behringer Ultradrive Pro DCX2496 Behringer Ultracurve Pro DEQ2496 Behringer Ultragraph Pro FBQ6200/3102/1502 In this Video I will show you the Electrolytic capacitors that need to be replaced, and I will show you how and where to find the right replacement capacitors. I will outline very step I took in replacing the capacitors and bringing this unit back to life. Here is a replacement capacitor List that created at DigiKey containing the exact Capacitors I used for their Project. The List is here for your convenience. I am not affiliated with DigiKey and it does not matter where you purchase your replacement capacitors from as long as they have the right specs. https://www.digikey.ch/en/mylists/lis... Chapters: 0:00 Introduction 0:56 Opening the Unit 2:44 Important Replacement Capacitor Values 4:24 Values and Position of Original Capacitors 4:38 Grouping Capacitors by Brand And Series 6:45 Establishing the Specs of Each Capacitor Series 7:25 Establishing the Ripple Current Ratings 9:55 Finding Replacement Capacitors on Mouser 13:06 The Replacement Capacitors I Chose to Use 15:11 Cleaning leakage from old Capacitors (I there is any) 15:22 Installing the New Capacitors 15:32 Polarity Chart for Electrolytic Capacitors 15:39 Soldering On the Capacitors 16:04 Clipping Off the Excess Leads 16:22 Applying Thermal Paste to Semiconductor 16:46 Reassemble the Unit 17:40 Testing the Unit