Kavenz VHP Full Bearing Service | Front Triangle, Rocker & Chainstay with the Bearing Tools V2

The complete bearing service on the Kavenz VHP – front triangle, rocker and chainstay – step by step with the Kavenz Bearing Tools V2. Autumn is the perfect time to give your pivots some love before winter. In this video we remove the old bearings, press in new ones and reassemble the frame with the correct torque values. 🔧 TOOLS USED • Kavenz Bearing Tools V2 (Extractor Male A, Extractor Female B, Press Female C, Press Male D ×2, Press Washer E ×2) • M8 threaded rod, thrust washers, M8 nuts • 13 mm wrenches ×2 · 6 mm hex key · Circlip pliers • Torque wrench · Grease · Medium-strength thread locker (Loctite 241/243) ⚙️ BEARINGS Every pivot on the VHP uses the same bearing: Ø15 × 28 × 7 mm (6902) • Front triangle: 6 bearings (VHP V1–V7 & VHP G) / 8 bearings (VHP X) • Rocker: 4 bearings • Chainstay: 2 bearings ⏱️ CHAPTERS 0:00 Intro 0:06 Frame disassembly 0:31 Removing old bearings – Front triangle 1:15 Installing new bearings – Front triangle 2:39 Removing old bearings – Rocker 3:43 Installing new bearings – Rocker 5:11 Removing old bearings – Chainstay 6:07 Installing new bearings – Chainstay 7:07 Frame reassembly 🛒 Bearing Tools V2 & bearings: https://www.kavenz.com/shop/1005354-k... Spare Parts: https://www.kavenz.com/spare-parts 📄 Manuals & tech guides: https://www.kavenz.com/support ⚠️ Always tighten bolts with a torque wrench to the values in your frame manual. Check all torques after the first 100 km, then every 200 km. If in doubt, contact Kavenz service or a qualified bike mechanic. Thanks for watching – enjoy your next ride! #Kavenz #VHP #MTB #BikeMaintenance #BearingReplacement #MTBService #BikeMechanic