IKEA PAX 100×58×236 with FORSAND Doors Assembly | Step-by-Step 3D Guide

Assemble a complete PAX wardrobe (100×58×236 cm, white) step by step, shown as a calm 3D animation – no talking, no music. What's covered, in 30 steps: • PAX frame 100×58×236 – feet, plinths, corner brackets, top panel, levelling, wall fixing and bottom panel • 2 KOMPLEMENT shelves with shelf supports • KOMPLEMENT clothes rail 100 • 2 FORSAND doors 50×229 with KOMPLEMENT soft-closing hinges, door bumpers and hinge adjustment (depth, side, height) • 2 HACKÅS handles (100 mm, anthracite): marking, drilling Ø 5 mm and fixing Every step follows the official assembly instructions: PAX frame (AA-2174072-9), KOMPLEMENT hinge (AA-2416848-2), KOMPLEMENT clothes rail (AA-938836-3) and HACKÅS handle (AA-2552508-1). The shelves have no separate instructions. The handle position on the door (centre 40 mm from the free edge, 1.05 m high) is our choice – the handle instructions don't specify it. Hidden connections are shown with a see-through panel, so you can see exactly where each part goes. You will need: 2 people, a step ladder, a flat-head and a Phillips screwdriver, a spirit level, a drill with a 5 mm bit, a clamp with a scrap piece of wood, a pencil, and wall screws + plugs that suit your wall (not included). Always fix the frame to the wall. Chapters: 0:00 Finished wardrobe and what's in the box 0:32 Step 1–3 · Remove the straps and unfold the frame 0:49 Step 4 · Fit the adjustable feet 1:04 Step 5–6 · Plinth holders and back plinth 1:17 Step 7 · Square the frame, fit the front plinth 1:30 Step 8–9 · Plinth clips and base supports 1:45 Step 10–11 · Corner brackets 2:04 Step 12 · Top panel 2:18 Step 13–14 · Lock the top panel, top connectors 2:35 Step 15–16 · Position, level and dowels 2:58 Step 17–18 · Wall spacers and fixing to the wall 3:19 Step 19–20 · Bracket covers and bottom panel 3:37 Step 21 · Shelves 4:02 Step 22–23 · Clothes rail 4:16 Step 24–26 · Doors and hinges 4:54 Step 27 · Adjusting the hinges 5:43 Step 28–30 · Handles 6:23 Finished · Flatpack Motion by TeDeS This is an independent production by Flatpack Motion — by TeDeS. It is not affiliated with, endorsed by or sponsored by IKEA. Always follow the instructions supplied with your product; they take precedence over this video. Need a clear 3D animation for your product? Discover TeDeS.