Using the Head Upside Down on JibONE or JibPLUS

Using the HeadPLUS Upside Down on a Jib You can easily use your HeadPLUS mounted upside down on a jib to achieve creative camera angles. Follow these steps to set it up safely: How to Mount HeadPLUS Upside Down on a Jib Lock the Jib: Make sure the jib is locked at the center so that vertical (up-down) movements are restricted. Remove Accessories: Disconnect the laser module and focus/zoom module cables, as cable arrangements will change during the process. Invert the Head: Loosen the screw at the tip of the jib while supporting the camera securely. Gently tilt the assembly down until it is completely upside down. Once inverted, re-tighten the screw. Adjust the Head Orientation: Pan the HeadPLUS by 180 degrees. Tilt the camera also by 180 degrees. Reconnect Accessories: Reattach the cables; note that the ports are now on the front side. Reinstall the laser module if needed. Summary Now your HeadPLUS is correctly configured to work upside down on a jib, enabling unique shooting perspectives with full motion control functionality.