Nelo 510 & Nelo 400 Front Hatch Assembling Tutorial

In this tutorial, we will show you how to assemble a front hatch in a Nelo 510 or in a Nelo 400. This front hatch, the Nelo 510 and the Nelo 400 can be found at http://www.paddle-lab.com. STEPS IN THIS TUTORIAL: 1 - Begin by marking the center of the front before starting to make the hole. 2- Use a 14 cm hole drill to create the hole. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   3- Finish by sanding the area with 80-grit sandpaper. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   4 - Utilize the front hatch plastic rim to mark the positions for the screws. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   5 - Use a 4.5mm drill bit to drill the holes. You may use a smaller drill bit initially to create a small guide hole in the correct spot. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   6 - Ensure that each screw is placed correctly in its designated location. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   7 - Apply adhesive to the inside of the plastic rim. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   8 - Perform the previous step directly in the boat, where the rim will be positioned. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   9 - Apply silicone around the plastic rim, ensuring full coverage. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   10 - Carefully place the rim in the boat, double-checking its correct positioning. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   11 - Securely fasten all the screws in place. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   12 -Position the bag onto the rim. -    • Nelo 510 & Nelo 400 Front Hatch Assembling...   #nelokayaks #nelotutorial #nelo510 #nelo400