HYUNDAI TUCSON JN 2007 2.0L G4GC FWD HEAD GASKET INSTALL PART-2

In Part 2 of this Hyundai Tucson head-gasket repair, I install and reassemble the cylinder head on a 2007 Hyundai Tucson JN FWD fitted with the 2.0-litre G4GC engine. ☕ If this video helped you out, you might like to shout me a coffee at: https://buymeacoffee.com/teknofied?l=en ☕ Every bit helps and is very much appreciated. ▶️ Part 1 – Head-gasket removal:    • HYUNDAI TUCSON JN 2007 2.0L G4GC FWD HEAD ...   This video covers preparing the engine block, cleaning the bolt threads, fitting the intake manifold and head gasket, tightening the cylinder head, checking the timing and reassembling the engine. I also replace several components while everything is accessible, including the water pump, front main seal, camshaft seal, timing-belt pulleys, thermostat, valve-cover gasket and spark-plug tube seals. Covered in this video: • Cleaning the cylinder-head bolt holes • Making a thread-cleaning bolt • Preparing the block and cylinder-head surfaces • Installing the intake manifold • Installing and tightening the cylinder head • Using a torque-angle gauge • Comparing the measured head-bolt torque readings • Cleaning the OCV filter and sensor • Reinstalling the camshafts and bearing caps • Replacing the water pump • Replacing the front main seal • Replacing the idler and auto-tensioner pulleys • Checking the timing-belt marks • Rotating the engine by hand • Refitting and tightening the harmonic balancer • Installing the thermostat and housing • Reconnecting the engine wiring, cables and vacuum lines • Lubricating the engine before its first start • Installing the valve-cover gasket and spark-plug tube seals Important: Some torque figures discussed in the video are measured readings and my own calculations. They are not a substitute for the manufacturer’s specified torque-angle procedure. Always confirm every torque specification and tightening sequence using the correct workshop information and the instructions supplied with your particular gasket and head bolts. This video documents the work I carried out on this particular vehicle. Components and procedures may differ between models and engine variants. Consult a qualified mechanic if you are unsure. Any work you do is your responsibility. #HyundaiTucson #G4GCEngine #HeadGasket