Realme c1 display removed | Disassembly of realme c1 display | How Remove realme c1 display.

Realme c1 display removed or Disassembly of realme c1 model Write description Disassembling the Realme C1 (RMX1811) to remove or replace its display assembly requires careful handling of its plastic housing clips and adhesive layers. Step-by-Step Realme C1 Display Removal Process 1 Power Off and Remove SIM Tray Prerequisite Power down the device completely and eject the dual-SIM and microSD card tray from the side using a SIM ejector tool. 2 Detach the Rear Housing Cover Use plastic opening pick Insert a thin plastic pry tool into the seam between the middle frame and the plastic back cover (starting near the SIM slot). Gently slide the pick around the perimeter to release the internal plastic clips. 3 Disconnect the Fingerprint and Battery Flex Crucial Safety Step Unscrew the metal shield protecting the fingerprint sensor and main board connectors. Disconnect the fingerprint flex cable first to avoid tearing it, then immediately disconnect the battery connector. 4 Remove Motherboard Shields and Display Flex Internal Disassembly Remove the remaining Phillips screws securing the upper motherboard shield. Disconnect the primary LCD display ribbon cable from the main board socket. 5 Apply Heat and Separate the Broken Screen Heat station 80^\circ\text{C} to 90^\circ\text{C} Place the phone display-side up on a heated separator pad for 3–5 minutes to soften the factory adhesive. Carefully slide a thin separation wire or opening card underneath the glass edges to lift the broken display module out of the middle frame.