PS5 Controller RISE4 Remap Kit V3 Installation Guide - eXtremeRate

Upgraded version for PS5 BDM030/040/050 Controller RISE4 remap kit. The main upgrade is that now you can map the touchpad without soldering, and the power supply to the back buttons will be more stable. Note: ⭐Please note the intermediate connector must be properly installed, as the kit draws power from the touchpad 1. Connect the touchpad cable to the connector at 3:44. 2. Connect the intermediate connector cable to the motherboard at 4:53. 3. Connect the intermediate connector cable to the top connector of the main FPC at 7:07. ⭐Soldering is not necessary. If you don't need to map the L3&R3 press-down input, please skip the soldering part and proceed with the rest of the installation process ⭐The included foam squares are for attaching to the corners of the motherboard. When the controller shell is closed, they increase pressure, ensuring the physical connection between the circuits in the kit remains stable and less likely to loosen due to external factors. ⭐The included long foam strips are replacements to support the original conductive film, ensuring consistent button responsiveness. If the original foam is intact, there is no need to replace it. Shop Links: Amazon US: https://exr.gg/4gS3kZD Amazon CA: https://exr.gg/3NhZICL Amazon MX: https://exr.gg/3NhFOrq Amazon DE: https://exr.gg/3NeAvsX Amazon UK: https://exr.gg/4gUJmxu Amazon FR: https://exr.gg/3NhAnbX Amazon IT: https://exr.gg/3NjjSfu Amazon ES: https://exr.gg/3NgAlBb Amazon AU: https://exr.gg/3zQ8ggX Amazon JP: https://exr.gg/4gYKHTS eXtremeRate: https://exr.gg/4eUZHAp Aliexpress: https://exr.gg/4gVWzWM eBay: https://exr.gg/3NhFQj2 Walmart: https://exr.gg/3zPEfxO Timestamps: 0:00 Intro 0:43 Open the controller 1:58 Remove the battery and disconnect ribbons 2:53 Install the L3 & R3 press-down remappable flex (optional step) 3:37 Install the intermediate connector (must-do step) 4:17 Install the main flexible circuit 4:40 Reconnect all the cables to the motherboard 4:53 Plug the black cable of the intermediate connector (must-do step) 5:07 Reinstall the battery tray and lock screws 5:37 Stick the square foams to the motherboard 6:25 Reconnect the battery and position the flexible circuit 6:48 Connect the remapping cables to the flexible circuit 7:26 Mount the paddles (plastic version) 9:25 Install the rise remap back shell (plastic version) 9:40 Mount the PCB (plastic version) 10:36 Mount the upper cover (plastic version) 11:35 Reassemble the controller (plastic version) 12:15 Mount the paddles (metal version) 14:15 Install the rise remap back shell (metal version) 14:40 Mount the PCB (metal version) 15:25 Mount the upper cover (metal version) 17:18 Reassemble the controller (metal version) 17:55 Self-check 19:03 Buttons mapping tutorial 21:15 FAQ and solutions ---------------------------- Follow eXtremeRate: YouTube:    / @extremerate   Reddit:   / extremerate   Discord:   / discord   Twitter:   / extremerate   Instagram:   / extremerate   TikTok:   / extremerate   Facebook:   / extremerate