Big Beech and the Unplanned Redesign - Wood Turning Project

Hello and welcome! In this video I will be taking a fresh piece of beech and making a bowl with an unplanned redesign. The wood was taken from a much larger piece and still very green so warped during the turn. As it got thinner, it warped faster. I decided to take one last sheer scraping cut, the bowl was not at all happy about that and removed a chunk from both sides. My own fault, sometimes we fly too close to the sun although it was a nice excuse to bring the Dremel out to play for a while! Finished in Danish oil. Thanks for watching! Please feel free to leave a comment on what you liked or disliked. If you enjoyed this, consider subscribing to the channel. Thank you for the support, it really means a lot!! Follow me on the socials:   / tfturning     / tfturning   #tfturning #Woodturning #woodworking 00:00 - Intro 00:12 - Beech wood 00:25 - Mounting to the lathe using a worm screw 01:07 - Getting started.. slowly 02:03 - Continued shaping of the outside 02:47 - Shaping the tenon 03:31 - Mounting on tenon and flattening the face 04:36 - Hollowing the bowl 06:51 - The error 07:09 - The redesign 07:28 - Shaping 08:08 - Scoring the edge 08:46 - Adding texture 09:04 - Burning 09:39 - Mounting with jam chuck 09:50 - Removing the tenon 10:23 - Adding my makers mark 10:35 - Danish oiling 11:23 - Take a look 11:44 - Thanks for watching! *These videos are non instructional and meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment!