P06DE-ENGINE OIL PRESSURE CONTROL CIRCUIT STUCK ON||Mahindra bolero

P06DE-ENGINE OIL PRESSURE CONTROL CIRCUIT STUCK ON When Monitored: This diagnostic runs when the following conditions are met: • Battery voltage is above 10.9 volts. • The Dual Stage Oil Pump circuit fault and stuck high fault are not active. • There are no active Engine Oil Pressure Sensor faults. • Engine running and the Oil Pump Solenoid is commanded off. When the engine oil temperature is lower, the engine speed necessary to enable the Dual Stage Oil Pump will be lower. The minimum engine speed can be between 1000 — 3500 rpm depending on oil temperature. Set Conditions: • The Powertrain Control Module (PCM) senses the oil pressure is above a calibrated minimum threshold with the Oil Pump Solenoid commanded off for 250.0 seconds. engine oil to low speed 30-40 km