How to Repair a PVC Tee in Tight Quarters & Fix Damaged Sprinkler Wire

In this video, we walk through fixing a broken 1" PVC tee tucked tightly against a sprinkler valve, along with repairing multi-strand control wire that took a hit from a shovel. When space is too tight for standard ratcheting cutters, keeping existing pipe intact requires patience and the right fittings. We’ll cover how to make clean flush cuts, clear burrs to protect valve seals, lay out the offset with new fittings, and install a telescopic slip fix coupling for a watertight seal. Plus, we locate hidden nicks in the wiring and seal them with gel-filled waterproof connectors to prevent intermittent zone failures down the road. Timestamps:0:00 – Diagnosing the leak & tight space challenges 0:21 – Handsaw vs. pipe cutter: making close cuts 0:40 – Deburring pipe & protecting the valve from debris 1:15 – Dry-fitting the offset, tee, and 90° elbow 2:56 – Gluing the manifold fittings 3:24 – Measuring & installing the PVC Slip Fix 4:18 – Inspecting shovel damage on irrigation wire 4:51 – Splicing with waterproof silicone nuts & protecting the line Tools & Materials Used:1" Schedule 40 PVC pipe, Tee, & 90° elbow 1" Telescopic repair coupling (Slip Fix) PVC primer & medium/heavy-duty cement Fine-tooth handsaw Waterproof gel-filled wire connectors Wire strippers & electrical tape