Fall-Line front tension monoball bushing install on the M2

Installation video of front tension monoball bushings on my M2. One of the mods I have installed for track and autocross performance. Disclaimer: I am an automotive enthusiast, not a certified mechanic. The information in this video is for entertainment and educational purposes only. Any modifications you make to your vehicle are done at your own risk. I am not responsible for any damage to your car or injury to yourself. The bushing tool can be found here: https://a.co/d/04bpWTsR Chapters: 0:00 Disclaimer 0:13 Introduction 1:45 Removal of the impact absorber bracket bolts 3:09 Loosening of the brake duct 4:12 Explanation of the failed attempt to create space for the tension strut to subframe bolt 5:16 Detail of bolts necessary to remove the impact absorber bracket 5:38 Torx bolt detail pictures 5:52 Removal of the infamous torx bolt 9:15 Removal of the impact absorber bracket 11:02 Removal of the tension strut to subframe bolt 12:05 Removal of tension strut 12:24 Bushing removal kit from Amazon 13:45 Pressing out the old bushing 15:05 Pressing in the new bushing 17:36 Install of clamshell to bushing 19:49 Loctite and torque of clamshell bolts 21:32 Install of tension strut - kind of :) 22.22 Torque specs for tension strut to subframe and knuckle 23:22 Reinstall of impact absorber bracket 30:07 Using a ratchet strap to pull the bumper and subframe together 34:40 Reinstall of impact bracket bolts 39:00 Conclusion