Starting up a straight CO2 Bottoms Up beer draft system

Congratulations! You're now the proud owner of the hands-free, waste-eliminating Bottoms Up draft beer system. Our installers trained you & your staff, but we know there's a lot of information to digest with this technology. So, we've made an overarching startup guide with some helpful tips on maintenance, cleaning and utilizing the system to its intended potential. Note: This system uses beer pumps and ONLY carbon dioxide (CO2) to pressurize. For systems using both CO2 and Nitrogen (N2) and no beer pumps, peep this video:    • Blended gas long-draw system startup // Bo...   0:10 Defining "long-draw" 0:30 Video overview 0:42 Turning on the glycol chiller (but not the pump/s) 1:13 Opening the CO2 supply valve 1:47 Opening the Keg CO2 supply valves & tapping kegs 2:37 Opening the Beer Pump valve 2:59 Filling the Empty Keg Detector 3:38 How the Empty Keg Detector works 4:35 Empty Keg lights 4:56 Purging the lines 6:15 Programming a cup size 7:24 Pour mode (or operation mode) 7:54 Turning on the glycol chiller pump/s 9:00 Topping off a pour after replacing an empty keg 9:53 Programming "sample" sizes with 16/20 oz cups 10:24 Cleaning the couplers, drip tray and drain pan 11:10 Lifetime warranty, satisfaction guarantee and routine maintenance 11:39 Replacing the diaphragm (How to:    • Replacing bottom block assembly & diaphrag...  ) 12:20 Cleaning the system using Purge mode 13:30 The "clicking" sound from the beer pumps For more information or further assistance, give us a call at (888) 618-0486.