Royal Enfield Himalayan - RPM Idle Screw | Adjustment DIY

Hey So this video covers the RPM Idle screw adjustment. RE recommends 1250+-50 RPM to be set at running condition. It is important that you take the bike out for a short ride and bring it up to running temperature. The screw is on the throttle body which can be access by raising the tank a bit while all other cable, wiring and hoses are still connected as you would need the bike running as idle is adjusted. The big brass screw is visible on the left hand side once you raise the tank by removing the two 10 mm screws that hold it to chassis. Cheers :) #RoyalEnfieldHimalayanIdlescrew #RoyalEnfieldHimalayan