Dishwasher Overflowed My Floor! How to Replace Bosch Inlet Valve 00425458

Is your Bosch SHU8805UC dishwasher filling with water when off or leaking onto the floor? In this video, I walk through the full step-by-step process to replace the water inlet valve (Bosch OEM Part #00425458). ⚠️ FAKE PART WARNING: Be careful when buying replacements online. I initially bought a $25 knockoff on Amazon listed under the Bosch brand name. It made a loud whistling noise and had a ground terminal that was way too thick for the connector. Stick with genuine OEM parts (~$55) to avoid leaks and fitting issues! 🛠️ TOOLS NEEDED: T15 Torx Screwdriver Needle-Nose Pliers (for internal hose clamp) Long-Handle Circle-Nose Pliers (optional, helps pull the hose off) 💡 KEY TRICKS & GOTCHAS IN THIS VIDEO: 1. Electrical Connectors: Do NOT just pull them! There is a small center locking clip you must press down before they will release. 2. Removing the Valve: The valve won't slide straight out. You must clear the corrugated hose and rotate the valve clockwise to clear the lower white plastic tab. ▼ TIMESTAMPS ▼ 0:00 - Intro & The Problem (Kitchen Floor Overflow) 1:27 - Replacement Part 2:07 - Power & Water Safety Disconnect 3:04 - Accessing the Valve & Clearing Hose Clearance 5:13 - Detach water hose 6:40 - Unscrew valve from dishwasher 8:23 - Wiggle out the valve 9:33 - Electrical Connector Trick (Don't Break the Clip!) 11:27 - Detach the internal water hose 13:10 - Original and fake part comparison 14:22 - Get new part ready 16:29 - Reinstall 20:32 - Attach water hose and test for leaks 22:02 - Attach bottom plate and wrap up #BoschDishwasher #SHU8805UC #ApplianceRepair #DIYRepair #BoschRepair