Repairing a Wall-Ball / Medicine Ball with a Speedy Stitcher Sewing Awl

A quick video on how to repair a damaged wall-ball or medicine ball using a Speedy Stitcher Sewing Awl. ▬ Contents of this video ▬▬▬▬▬▬▬▬▬▬ 00:00 - Intro 00:18 - Project List 00:44 - Cleaning the Med-Ball 01:21 - Marking out the Stitches 02:13 - The Speedy Stitcher Sewing Awl 02:42 - Perforating the Med-Ball 03:28 - Setting up the Awl for Stitching 04:46 - Stitching the Med-Ball 08:11 - Messing up + Fixing the Knot 08:57 - Stitching + Time-lapse 11:05 - Closing off the Stitch 12:03 - Outro ▬▬▬▬▬▬▬▬▬▬ Project List: • Goo-gone + Rags or Paper Towels • Speedy Stitcher Sewing Awl (https://amzn.to/3edDhwV) • Nylon Wax Thread • Marker • Needle Nose Plyers (optional) • Scissors • Lighter Steps: 1) Use Goo-gone & rags to clean any existing tape residue off med-ball. 2) Mark the med-ball along both sides of the tear and give yourself tick marks to mark the stitch locations. 3) With the straight needle, perforate the med-ball in the proposed stitch locations. 4) Setup the thread and curved needle in the sewing awl. Feed the thread through the curved side of the needle so the loose end is coming out the back. 5) Punch curved needle through first two holes and separate thread from the back of the needle. 6) Adjust length of thread if needed. 7) Pull out needle, leaving thread running through holes. 8) On opposite side from 1st hole, punch through the med-ball, separate thread from back of needle to create a loop, feed tail / thread through loop, pull needle back out to tie stitch. 9) Going in the opposite side from the last hole...rinse wash and repeat. 10) To end or close the stitch, tie the two ends of thread together and singe the knot.