Basic HMI Timer/Macro Methods with Weintek’s EasyBuilder Pro Software

Weintek USA official site - http://www.weintekusa.com Call for pricing and availability 425-488-1100 Timer object is a switch that can be used to control the mode to count time. 0:00 - Introduction 0:49 - Timer: On delay 2:58 - Demonstration 3:33 - Timer: Macro-1 7:41 - Demonstration 8:55 - Timer: Macro-2 14:13 - Demonstration 15:44 - Timer: Macro-3 17:16 - Demonstration Timer object uses the following 6 variables. Input bit (IN) - Bit, Measurement bit (TI)l, Output bit (Q), Preset time (PT), Elapsed time (ET), & Reset bit (R). To start, click the Timer icon on the toolbar to open the property dialog box. Note: If use cMT Series, clicking the Timer icon on the toolbar will open the Timer managing window, click [New] to configure. Period 1: When the IN turns ON, TI turns ON and the ET starts counting. The Q remains OFF. Period 2: When the ET equals to the PT, the TI turns OFF and the Q turns ON. Period 3: When the IN turns OFF, the Q turns OFF and the ET is reset to 0. Period 4: When the IN turns ON, the TI turns ON and the ET starts counting. The Q remains OFF. Period 5: Turns IN OFF before the ET reaches the PT, the TI turns OFF, and the ET is reset to 0. Since the ET doesn’t reach the PT, the Q remains OFF. Please see chapter 13.30 of our manual for more details. You can download our manual and EasyBuilder Pro for free at www.WeintekUSA.com. #EBProMacro #MacroBasics #WeintekMacro