2001 Mr2-S Valve Cover Gasket Replacement

Hey everyone, back again with another job! Today we are replacing the valve cover gasket and spark plug o-rings on a sw30 mr2 Spyder. Tools I used: 10mm socket 12mm deep socket Spark plug socket 1/4in socket wrench 1/4in torque wrench *Permatex gasket maker (this goes on the front and back of where the cover mates with the timing chain cover) Needle nose pliers Flashlight Screwdriver Total job time: 2 Hours The bolts in this job need to be torqued correctly so here are the specs: Valve cover bolts: 8ft/lbs 2 center bolts on valve cover: 80in/lbs Ignition coil bolts: 7ft/lbs Sorry for the few mistakes I made in the video, it was super hot that day and I was in a rush to get this job done! I tried to correct all my mistakes in the video but if I missed anything let me know in the comments! I'm still new to making these videos so please understand! ---------------------------------------------------------- Some helpful links: https://www.spyderchat.com/ https://www.spyderchat.com/threads/to... https://www.spyderchat.com/threads/va...