How To Fix a Flaked Epoxy Floor (Larger Areas)

Step 1 - Always prep the surface using a diamond wheel to abrade the surface. Cup wheel- https://www.homedepot.com/p/RIDGID-4-... Step 2 - Repair any defects or damaged in the surface if needed prior to applying the coating. Epoxy crack filler - https://columbusepoxyproducts.com/pro... Epoxy deep fill patch - https://columbusepoxyproducts.com/pro... Step 3 - Mix the basecoat material by following all mixing instructions. After the material is thoroughly mixed, apply the coating thick enough so the flake can soak into the material and bond to the coated surface. TIP: Gently pat the flake with your gloved hand to help the flake stick into the coating. Polyaspartic touch up kit (Can be used for base & top coat) - https://columbusepoxyproducts.com/pro... Step 4 - After the coating has cured for a minimum of 60 minutes, remove any excess flake. Then sand the flaked area with an abrasive pad or 100 grit sandpaper followed by thoroughly vacuuming the area. Step 5 - After mixing the polyaspartic top coat, apply the material at the desired thickness over the flaked surface. NOTE: applying the top coat thicker will leave the surface smoother and glossier while a thinner coat will leave the surface with more texture. Step 6 - Allow the coating to cure for 24 hours before returning to service Prep & Vacuum 0:00-0:33 Mix & apply polyaspartic basecoat 0:33- 1:52 Prep the Flake 1:52-2:11 Mix & Apply Top Coat 2:11-3:06 Filler Repair 3:06-4:54 Part 2 Coating application 4:54-7:12 To purchase material please visit https://columbusepoxyproducts.com/ or email trent@columbusepoxyflooring.com #howto #diy #floor #repairing #epoxyflooring #concreterepair