Artillery X4 Plus Review

The Artillery X4 Plus is a solid 300x300x400mm printer with a ton of features out of the box. With Klipper Firmware installed, which sets the default speed at 300 mm/s and permits a maximum speed of 500 mm/s. Printing Technology - FDM Build Volume - 300*300*400 cm (L*W*H) Product Dimensions - 510*490*680mm Net Weight - 15.5 kg Typical Printing Speed - 300mm/s Max Printing Speed - 500mm/s Max Acceleration - 10000mm/s² Printing Accuracy - ±0.1mm Printer Frame - Robust All Metal Design Filament Diameter - 1.75mm Nozzle Temp - ≤300°C Hotbed Temp - ≤100°C Build Surface - Dual Sided Textured Magnetic PEI Plate UI Language - Support English, German, Chinese File Transfer- USB Drive, Wifi Extruder - All Metal Dual Gear Direct Drive Levelling Mode - 121 Point Auto Levelling Display Screen - 4.3 inch Touchscreen Print File Format - G-Code Resume Printing - Yes Rated Power- AC100/240V Rated Voltage - 450W Slicing Software - Artillery Slicer, Cura Support Filament - PLA/TPU/PETG/ABS/PET/Carbon Input Shaping - Yes (Preset in Factory) Pressure Advanced - Yes (Preset in Factory) Dual Support Rods - Yes Auto Clean Nozzle - Yes more info: https://www.artillery3d.com/products/... Models used all from Twisty Prints:   / posts   Inquiries cooperation contact: Will Zoobkoff - StudioZombie3D studiozombie3d@gmail.com https://linktr.ee/Zombiej79   / zombiej79_3d     / will.zoobkoff   https://vm.tiktok.com/ZMLsvq3Rh   / studiozombie3   #3dprinting