How to run first time configuration wizard on checkpoint

Below are the steps to run first time configuration wizard: ============================================================== 1. Connect a standard network cable to the appliance's Management interface and to your management network. This interface is preconfigured with the IP address 192.168.1.1. 2. Connect to the management interface by connecting from a computer on the same network subnet as the Management interface (for example, with IP address 192.168.1.x and net mask 255.255.255.0). This can be changed later through the WebUI. 3. To access the administration interface, initiate a connection from a browser to the default administration IP address: Gaia OS Portal: https://192.168.1.1 SecurePlatform OS WebUI: https://192.168.1.1:4434 Note: Pop-ups must always be allowed for https://(appliance_ip_address). 4. The login page appears. Log in with the default system administrator credentials: Login name: admin Password: admin Click on Login. 5. Change the administrator password, as prompted. The default password is provided to you only to allow access to the appliance for the first time. For security purposes, you must change it to a more secure password. 6. The First Time Configuration Wizard runs. Perform all the necessary configuration steps. Check the settings that appear on the Summary page. 7. In addition, on Gaia OS you can check the relevant log file - /var/log/ftw_install.log 8. Click Finish to complete the First Time Configuration Wizard. The machine will automatically restart (this may take several minutes).