Cara Cepat Mengatasi problem hydrolik lemah Excavator komatsu pc200

Salam Alat Berat Klik link DownLoad Aplikasi UT CONNECT 👇👇👇👇👇👇👇 https://unitedtractors.onelink.me/AfI... Langsung Download dan INSTALL Aplikasi UT CONNECT di SMARTPHONE Anda Nikmati Kecanggihan dan Kemudahannya #Makintau Nanti saya Share Cara Registrasi dan Cara Penggunaanya... ☕☕☕☕☕☕☕☕☕ Follow Instagram   / ujang_suhendar   Bagaimana Cara Cepat Mengatasi problem hydrolik lemah Excavator komatsu Pertama lakukan dulu pengukuran Hydraulic Relief pada All Attachment dan Travel sistem.. jika main Pressure kurang, coba dilakukan Adjusment pada Main relief valva Silahkan tonton video sampai tuntas Cara ini sama untuk unit excavator PC200-7,PC200-8,PC200-8MO,PC210-10 Adjust work equipment and travel relief pressure If the relief pressure of the work equipment during travel is not normal, adjust the main relief valves (1) and (2) as follows. (1): F main relief valve (2): R main relief valve • To adjust the front pump-side main relief valve (1), remove the cover at the lower part of the control valve. • To adjust the rear pump-side main relief valve (2), remove the cover at the upper part of the control valve. • On each main relief valve, adjust only the low-pressure setting (By adjusting the low-pressure setting, high-pressure setting is automatically adjusted). REMARK • Turning the holder (5) clockwise increases the pressure, and turning it counterclockwise decreases the pressure. • Amount of adjusted pressure per rotation of holder (5): Approximately 20.5 MPa {209 kg/cm2}REMARK • Turning the holder (5) clockwise increases the pressure, and turning it counterclockwise decreases the pressure. • Amount of adjusted pressure per rotation of holder (5): Approximately 20.5 MPa {209 kg/cm2}REMARK • Turning the holder (5) clockwise increases the pressure, and turning it counterclockwise decreases the pressure. • Amount of adjusted pressure per rotation of holder (5): Approximately 20.5 MPa {209 kg/cm2} #MRV #LowPower #Excavator