Pneumatic Puncture Fixture Setup & Specimen Clamping | QIANTONG

See how a pneumatic puncture fixture is installed and how a fabric-like specimen is positioned and clamped on a QIANTONG material testing machine. The video shows the lower fixture installation, pneumatic tubing connections, upper puncture head installation, foot pedal operation, specimen placement, head-position and travel-limit adjustment, and an overview of the software controls. It ends with releasing the clamp and replacing the specimen. This walkthrough is intended for laboratory operators learning the fixture setup shown. The specimen material, test standard and machine model are not identified. The software screen shows “Connect Failed”; a completed puncture curve or measured result is not demonstrated. For fixture selection, send your material, test standard, required force range, specimen dimensions, testing-machine model and destination country. Suzhou Qiantong Instrument Equipment Co., Ltd. Website: https://www.qiantongtest.com/ Email: hugh@qiantongyiqi.com 00:00 Install the lower fixture 00:20 Connect pneumatic tubing 00:52 Fit the upper puncture head 01:13 Foot pedal and air line 01:27 Position and clamp the specimen 02:10 Adjust head position and travel limit 02:34 Software controls 03:04 Release and replace the specimen #PunctureTesting #TestFixtures #MaterialTesting