2026 Farizon EV High Top Van Installed Child Restraint Anchorage Points | Littles Child Restraints

In this video we are showing you the child restraint anchorage points we installed at the base of the seat in our client Victor’s three-seater. Victor insisted I take it for a drive—and wow! The comfort and acceleration almost convinced me to buy one myself! 👍😊 This vehicle has a centre seatbelt integrated into the seat back. For this installation, we fitted the anchorage points to the seat base. An integrated seatbelt alone does not confirm suitability for child restraint anchorages; engineering assessment is essential. The installation requires an Engineer’s Report, which Littles organises through Comptune Engineering. Another happy client! 🙌 We’re often asked, “Can a child seat go in the front?” It may be possible, depending on the vehicle’s seating layout, the child’s age and size, and the vehicle and restraint manufacturers’ instructions. A suitable anchorage point is also required for a tethered restraint. “What about rear-facing in the centre?” This needs individual assessment of the seating position and airbag configuration. Clearance from the driver and controls alone does not establish suitability. Never install a rear-facing restraint where it could be struck by a deploying passenger airbag. “Can I disable the airbag?” Do not disconnect or modify it. If the manufacturer provides an on/off switch, seek professional advice and follow the manufacturer’s instructions and applicable requirements before considering a child restraint in that position. Need our services? Contact us at: 1300 728 363 or 02 728 363 if you are calling outside NSW Website: https://littleschildrestraints.com.au/ Follow us on our Socials Facebook:   / littleschild.restraints   Instagram:   / sam_at_littles