Making Activated Charcoal Soap with 70% Shea Butter | A Simple & Small Recipe
Huy Makes Soap
0:00 / 0:00
Making Activated Charcoal Soap with 70% Shea Butter | A Simple & Small Recipe
2 865 просмотров · 1 год назад
Huy Makes Soap
3,59 тыс. подписчиков
2 865 просмотров · 1 год назад
This video showcases the simple process of making activated charcoal soap using just 3 oils: coconut oil, castor oil, and 70% shea butter. Watch as the ingredients come together in this quick and easy recipe, perfect for anyone looking for a straightforward DIY soap-making experience
RECIPE:
Oils and Butters (250 g):
🫘 13 g castor oil
🥥 62 g coconut oil
🧈 175 g shea butter
Lye Solution:
⚗️ 33.6 g Sodium Hydroxide (Caustic Soda)
💧 63 g Distilled Water
Important Note: Always handle sodium hydroxide with extreme care. Wear protective gear, including gloves, goggles, and long-sleeved clothing. Work in a well-ventilated area and follow all safety guidelines.
Additives:
🧂 5 g sodium citrate
Sodium citrate is a salt derived from citric acid. Sodium citrate acts as a chelating agent, meaning it binds with metal ions in water, which helps prevent soap scum from forming. By using sodium citrate, I can ensure that the soap performs well in both soft and hard water.
Note: During the curing process, white crystalline spots may appear on the surface of the soap due to the sodium citrate in the recipe. This is normal, non-harmful, and can be easily rinsed off.
STEPS:
00:00 - Intro
00:13 - Weigh coconut oil.
00:25 - Weigh shea butter.
00:40 - Weigh castor oil.
00:50 - Melting the oils and butters.
01:08 - Add 1/2 tsp acitivated charcoal into the oil
01:25 - Check temperature of the oil.
01:34 - Make lye solution.
01:35 - Weigh distilled water.
01:50 - Weigh sodium citrate and add to the water.
01:57 - Stir to dissolve the sodium citare.
02:16 - Wear gloves and goggles.
02:20 - Weigh sodium hydroxide.
02:35 - Add the sodium hydroxide into the water mixed with sodium citrate.
02:44 - Stir gently to dissolve the sodium hydroxide.
03:02 - Check temperature of the sodium hydroxide solution.
03:06 - Add the sodium hydroxide solution into the oil.
03:20 - Blend until reach trace.
03:43 - Pour into a mold.
04:06 - Unmold.
04:06 - Unmold.
04:20 - Cut.
05:10 - Cure.
05:14 - Using.
DISCLAIMER:
This video is intended to share personal experiences in making soap at home and is not a tutorial. The soap recipe in this video is based on personal preference and is not created for commercial use or to suit everyone. Results may vary depending on environmental conditions, ingredients, and individual techniques. The creator is not responsible for any issues that may arise from following the steps and recipe presented in this video.