EMS: Enhanced Mobility Socket » 3-Stage Casting Process

VIDEO SUMMARY: Ou recommended procedure for casting a patient for the EMS Inner Socket. VIDEO INDEX (Expand Description to View - Click "Show More") » 00:00:00 - Introduction to the EMS Socket System 00:00:24 - Why we developed the EMS Socket (Our Passion) 00:01:26 - Casting and Fitting Procedures • 00:01:27 - Casting Panels for the 1st Splint • 00:04:38 - Casting Panels 2nd Splint - Knee Flexion 6º-10º • 00:05:37 - Making the Physical Cast • 00:11:46 - Removing the Vacuum Hose While Casting (Tip) • 00:12:44 - Casting the 2nd Splint 6º-10º Flexion • 00:13:14 - Final Casting Wrap Knee Flexion Angle 12º-15º • 00:15:00 - Removing the Cast + Final Notes 00:17:00 - Important, How to Prepare and Mark the Positive Mold for a Guaranteed Fit. What to Send EMS. 00:21:27 - Explanation of EMS Trim and Socket Fabrication Steps • 00:22:05 - Creating the Distill End Chamber in the Socket 00:24:28 - Fitting & Donning Procedure • 00:24:57 - Socket Recommendation (Tip) • 00:25:25 - Initial Fitting of the EMS Socket on the Patient • 00:26:11 - Explanation of the Patented Corrugations and Texture inside the EMS. (This holds the socket in place without excessive squeezing the limb of the patient.) • 00:26:11 - What to further look for during the initial fitting. 00:29:19 - Donning the EMS Socket & Looking for Range of Motion 00:30:09 - Troubleshooting the EMS Socket • 00:33:00 - Dealing with Soft Tissue Volume Changes • 00:33:51 - Special Considerations with Limb Profiles 00:35:40 - Conclusion EMS: Enhanced Mobility Socket Website: https://nettworkmfg.com/ems/ Phone Number: (320) 654-8352 Address: 40091 County Road 1 - Rice, Minnesota 56367 #EMS #Prosthesis #ProstheticLeg