Ford Fusion - INTERIOR DOOR HANDLE REPLACEMENT (2006 - 2012)

Step-by-step guide on how to change / remove / replace front driver side interior door handle on first generation Ford Fusion sedan ( 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | SE | SEL | LIMITED | AWD). Support the channel and get extra perks as a Channel Member:    / @quitealright   To replace the inner door handle you will have to remove door panel. Start by removing three Torx T20 mounting screws (one behind the door handle and two on a side of the door panel). Then remove 7mm mounting screw in the bottom of the door panel handle. Remove power window and power mirror switch assembly and pop out the panel. Then remove 8mm door handle mounting screw and detach the cable from the handle. Install new handle in its place and attach the cable to it. Make sure to test the door handle prior to putting everything back together. THIS VIDEO IS AVAILABLE IN DIFFERENT LANGUAGES! Press Settings under the video and then Audio Track! Thanks for visiting my channel. Don't forget to Like the video / SUBSCRIBE to the channel! ⚠ DISCLAIMER: While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.