FPV Beginner series: Step up any FPV Drone(mostly) from binding to flying / Darwin BABY Ape V2 ELRS

This video is to walkthrough all the steps to set up a FPV drone. We will cover, how to flash the ELRS firmware, methods of binding ELRS, setup Fly Modes in Betaflight, connect the VTX to goggles and finally test fly the Baby Ape. Check out the Darwin Baby Ape:https://darwinfpv.com?dt_id=2050202 Need to flash your Radio ELRS firmware? Check this！    • How to Flash Radiomaster TX12 MK2 ELRS Fir...   Just want to setup a bind phrase to your radio? Check this!    • How to setup binding phrase for most ELRS ...   Below are the links of the software required, they are all free to download ExpressLRS/ELRS configurator https://github.com/ExpressLRS/Express... Wifi password: expresslrs (all lower case) Betaflight https://github.com/betaflight/betafli... Specs for the Baby Ape Specifications Receiver Options: PNP, ELRS 2.4GHz, or R81 Motors: 1104 4300KV 2-3S Brushless Motor Camera: CADDX ANT Camera Propellers: 3016 3-Blade FLIGHT CONTROLLER If you are willing, you can buy me a coffee to support this channel! Thank you in advance! https://bmc.link/iflyxwing Mounting holes distance: 25.5X25.5mm PPM/DSM/IBUS/UAR share: UART1-RX Main control chip: STM32F411 Supports Betaflight firmware IMU: MPU6500 (SPI) Integrated OSD ESC Firmware upgrade: Supports Dshot600/Oneshot125 Main control chip:EFM8BB21 Continuous current: 15A Pe ak current:17A (10S) Input voltage: 1-3SLiPo BEC output: no MOS: 3*3 VTX Transmitting power: 0mW/25mW/100mW/200mW switchable Weight: ≤3.2g (except antenna) Power dissipation: +12V/600MW Full video format: NTSC/PAL Supports TBS SmartAudio Input voltage: 7V~24V Size: 25×20×6mm Channel: 40CH 0:00 Intro 0:24 Flash ELRS firmware 5:07 Bind with radio 6:44 Set up modes in BF 9:56 Connect to the VTX 11:42 Flying footage