Engine Oil Cooler O-Ring installation for 2008 Infiniti G35x - fast and easy!

GOAL - Stop oil from leaking underneath your car by replacing the "Engine Oil Cooler O-Ring" MECHANIC COST: 3 mechanic quotes I got were $175, $190, $140. DIY COST: $5.99 (Cost of part) EXPERTISE REQUIRED - Easy (Same as an oil change) TIME REQUIRED - 10 minutes TOOLS: 22mm Socket/ratchet or wrench Oil Filter wrench (if you can't hand turn it) New O-Ring - O'Reilly* & Autozone - "Dorman OE Solutions Engine Oil Cooler Seal - Part #917-036" Part available for $6 at O'Reillys but their site sometimes WON'T show it is* STUFF REMOVED: 1 - Oil Filter 1 - 22mm Bolt for oil filter housing 1 - O-Ring 1 - Undercarriage protector (may not be there) STEPS: Remove undercarriage plastic protector (may not be there for a variety of reasons). Place oil pan under oil filter. Unscrew oil filter. Unscrew 22mm bolt underneath the oil filter. Remove bad O-Ring on opposite side of filter housing. Replace w/ new O-Ring on the INNER ring of the housing. Slide housing back into place and affix with 22mm bolt. Reattach oil filter (ONLY if not dented, otherwise replace w/ a new filter). Fill car back up with oil (the same quantity as what was lost when the filter came off). DONE! Give yourself a high five!