Zhiyun Crane M2 balancing Canon M50 EF-M 15-45mm

Tutorial to balance the canon m50 with the Zhiyun Crane M2 with the Canon EF-M 15-44mm. How to balance the Canon M50 with the Zhiyun Crane M50. #zhiyun #crane #m2 #canon #m50 Check Zhiyun Crane M2 prices here: USA: https://amzn.to/2VgTxnj UK: https://amzn.to/3lkk0Li CA - https://amzn.to/2lSvLzN How to setup the Canon M50 and EF-M 15-45mm lens on the Zhiyun Crane M2: Unlock the red locking nut and slide the arm upwards Tighten the locking arm again Position the Crane M2 so that the Crane M2 screen is facing you Fix the Canon M50 via the large slot in the base plate and slide it on Clamp the baseplate into position with the Canon M50 as far left as it will go Warning: at this stage the camera is loose – mind your lens! Turn the Crane M2 with the joystick and screen to the left Undo the red locking nut again and adjust the slider until the camera balances – it is fiddly Then tighten the red locking nut again Loosen the camera on the baseplate and slide the camera forwards or backwards – until it balances vertically You may need to adjust the role axis vertically – again it’s fiddly Undo the locking nut (circled in the video) Now you need to slide the base plate along the arm to balance the camera so that the lens points upwards It’s possible that the viewfinder rubber will stop you getting this bit right Don’t worry adjust the best you can – a bit of guesswork Once the weight of the camera is on the gimbal there is enough clearance There will be enough clearance Don’t forget to unlock the pan axis You can even do vortex mode