NX CAM Tutorial | How to use start and end events in NX to avoid collisions 👀

In this NX tutorial, we will show you how to use start and end events to avoid collisions between the tool and the workpiece in a milling manner. ✌ For this tutorial, we have a special workpiece: our Spartan Helmet. We milled this in 2022 together with Berthold Hermle AG. In doing so, we had to enter a very deep area of the helmet with a very long tool and make sure that we did not create a collision. 👀 Read more 👉 https://bit.ly/yt-en-quicktip-may22 ▬ About our channel ▬▬▬▬▬▬▬▬▬▬▬▬ In our NX CAM tutorials we show you tips & tricks around working with Siemens NX. You work with Siemens NX and now and then you stumble over a problem for which you can't find a solution? Or you want to make your work with NX even more efficient? Then you are right on this channel. Heinrich Flaum works as a CAx Senior Pre-Sales Consultant at JANUS Engineering and shares new tips and tricks from his work with Siemens NX on our YouTube channel every month. ▬ Related videos ▬▬▬▬▬▬▬▬▬▬▬▬ Difficult Approach Moves in Turning. ▶    • NX CAM Tutorial | Difficult Approach Moves...   ADD-ON | Get your tilted approach setting on many operations at once! ▶    • NX CAM Tutorial ADD-ON | Get your tilted a...   Sparta Helmet - Digital gets real ▶    • 🖱 Digital gets real - Wie ein Sparta-Helm ...   Find more tips & tricks on Siemens NX in our playlist with all tutorials: ►    • NX CAM QuickTips (English)   ▬ More useful infos ▬▬▬▬▬▬▬▬▬▬▬ Here you will find further useful information and downloads for working with Siemens NX! 📍 Blog: https://blog.janus-engineering.com/en... 📍 Website: https://www.janus-engineering.com 📍 Subscribe to our newsletter: https://www.janus-engineering.com/de_... 📍 LinkedIn:   / 3219238   📍 Facebook:   / janusengineering