How to replace a Crankshaft oil seal distribution and gearbox side for Diesel Engine R9M

Oil leakage is a common sign that the oil seal needs to be replaced. A step by step guide on how to replace a crankshaft oil seals distribution (50x81x11,5) and gearbox (96x180x201) side for Diesel Engine R9M will provide a solid base for a safe and sound installation. Chosen car for demonstration: Renault Scenic II 1.6. 19036731B Shaft Seal, crankshaft https://ecatcorteco.com/web/corteco/e... 49363957 Shaft Seal, crankshaft https://ecatcorteco.com/web/corteco/e... The Diesel Engie R9M is installed in the following vehicles: Renault: Alaskan, Espace, Grand Scenic, Kadjar, Koleos, Laguna, Latitude, Master, Megane, Megane CC, Scenic, Talisman, Trafic, Vel Satis Nissan: Navara, Navara Pick Up, Qashqai, Xtrail 01:42 Always utilize the included tools for dismantling or mounting 02:27 Carefully clean the surface where the seal will be mounted 03:14 Pay attention to the torque value 03:43 After oil seals mounting, wait 2 hours before starting the engine 04:03 Always use new bolt for every pulley replacement 04:41 The tool Torque Plus is required for this dismounting operation 05:44 Pay attention for a correct centering of the oil seals 05:53 Carefully clean the surface where the seal will be mounted 06:16 Always use Corteco original products 06:26 Carefully apply the silicone paste only in the highlighted area 06:44 After oil seals mounting, wait 2 hours before starting the engine 07:02 Pay attention to the torque value 07:23 Pay attention for a correct mounting 07:37 Always use new bolt for every pulley replacement