#w650 Winterization 12 - Carb Fuel Level

Before you start tinkering with the idle screws you have to make sure the following conditions are already fixed: 1) Float valves are in good condition 2) Floats are good 3) Float distance is set correctly 4) Fuel level is correct in the carb (this video) 4) No vacuum leaks. Only after all of these conditions are set and resolved, only then you can go ahead and play with the idle screws. Mine are set at 2.3/8 turns out from lightly closed position. Hope it helps to tune your Kawasaki #w650.