I Made a Water Pump Using an Air Cooler/Baleno Motor | DIY Water Pump

I Made a Water Pump Using an Air Cooler/Baleno Motor | DIY Water Pump In this video, I’m building a DIY High-Pressure Water Pump using a Baleno motor and PVC pipe. 🔧💦 This project is designed to achieve strong water pressure while using simple and easily available materials. For the real-world test, I set up the pump with a 10ft suction head and a 30ft discharge head. The suction pipe is connected down into a well, allowing the pump to pull water from a depth of approximately 10 feet. On the discharge side, the pump pushes the water through the pipe with high pressure and throws it a long distance. DIY High-Pressure Water Pump 💦 | 10ft Suction & 30ft Discharge Test 🔥 | Baleno Motor + PVC Pipe YouTube Description I’ll show you the complete setup and the actual performance of this homemade water pump. You’ll see how the pump handles the 10ft suction, how much pressure it produces, and how far it can throw water through the discharge pipe. 💦🔥 This is a great DIY mechanical project for anyone interested in water pumps, motors, PVC pipe projects, mechanical engineering, and homemade machines. Watch the video until the end to see the complete high-pressure water pump test and the results! If you enjoy DIY projects and creative engineering builds, like the video, subscribe to the channel, and turn on notifications for more homemade machines and experiments. ❤️🔧 Project: DIY High-Pressure Water Pump Motor: Baleno Motor Material: PVC Pipe Suction Head: 10 Feet Discharge Head: 30 Feet #DIY #WaterPump #HighPressurePump #MechanicalEngineering #DIYProjects