10 Tiny Motors Underwater — How Much Voltage Can They Take?
ChaosElectric
0:00 / 0:00
10 Tiny Motors Underwater — How Much Voltage Can They Take?
19 715 просмотров · 4 дня назад
ChaosElectric
696 подписчиков
19 715 просмотров · 4 дня назад
Ten small DC motors. One water tank. Higher and higher voltage. Which designs keep spinning, and which give up first?
From a tiny 816 coreless motor to a flat 300 motor, each gets a turn. Along the way, a lead wire burns through, a gear comes loose, and two motors get a separate run in air after their underwater tests. The final comparison is at the end.
CHAPTERS
00:00 Opening + 816 coreless motor
00:35 K30 — the slim challenger
01:23 050 — first run
02:14 The thin lead wire burns through
02:28 050 rematch with thicker wire
03:39 030 — a gear comes loose
04:53 Standard 130
06:25 Red 130 — underwater run
07:01 Red 130 — separate test in air
07:32 180 — the longer underwater run
10:42 180 — separate test in air
11:15 Yellow-cap 260
12:20 Round-can 140
13:29 Flat 300 — final setup
14:20 Flat 300 — voltage ramp + final results
MOTORS TESTED
816 coreless, K30, 050, 030, standard 130, red 130, 180, 260, 140, and 300.
Model names follow the supplied seller reference and the visible motor shapes; variants sold under the same name may differ.
HOW TO READ THE RESULTS
• Voltage labels are approximate readings shown on the power supply, not independent measurements at the motor terminals. Display updates and current limiting can affect what is shown; the supply's voltage, current and power readings may not update together.
• “Stopped” describes the visible end of a run and the associated display/current change. It does not identify the exact internal failure mechanism.
• The red 130 and 180 were still running when their water tests ended at a displayed 61 V. Their underwater failure limits were not reached. This does not mean that either was tested above 61 V.
• Their later air tests are separate: approximately 16.6 V for the red 130 and 43.7 V for the 180. These values are not included as underwater failure results.
• The 050's first interruption was a thin lead-wire failure. Its motor result comes from the rerun with thicker wire.
• These are observations from individual samples under changing test conditions, not manufacturer ratings, recommended operating voltages, a controlled durability ranking, or proof of waterproofing or long-term reliability.
SAFETY DISCLAIMER
This video documents a destructive electrical experiment. It is not a tutorial or a recommendation to repeat the setup. Electricity near water can cause electric shock and short circuits; overloaded motors and wiring can cause burns, fire, and flying debris. Do not attempt to recreate this experiment. Use motors only within their manufacturers' specified limits and intended conditions.
Which motor surprised you most? Leave the model name and your prediction before watching the final results.
#DCMotor #MotorTest #UnderwaterExperiment