Centurion D6 Smart gate motor installation in Mondeor Call Smart Gates Pottie 083 778 2288

Centurion D6 Smart sliding gate motor installation in Mondeor Johannesburg by Smart gates. Julia's gate motor was stolen just after it was installed. Julia searched the internet and found Smart gates on Youtube and exactly knew, that he wanted Smart Gates to install her replacement Centurion D6 Smart sliding gate motor. Juia supplied the complete gate motor system, including anti tamper alarm systems. Because there was no proper platform to mount the gate motor on, it was decided to create a steel platform and set it in concrete. Smart gate did all of this and returned to site a week later. On returning to site, it was much easier. the steel platform was already level on all axis. Smart Gates just needed to assemble the gate motor, weld the gate motor steel base plate onto the steel platform, and re weld the steel gate rail into position. The gate motor steel base plate was then welded into position onto the steel platform and the gate motor was bolted down into position by using all the supplied steel bolts, nuts, washers etc. When the gate motor is bolted down, the anti theft bracket ears are also bolted down at the same time. With the gate motor in place, one could weld the steel rack into position. The steel gate rail was welded into position and steel angle brackets in 40x40x3mm size were used at a spacing of 500mm. The Centurion D6 Smart sliding gate motor is a 24 volt system, which can handle steel sliding gates up to 600kg in weight. These gate motors can also run steel sliding gates up to a speed of 38 meters per minute. in order to achieve this speed, plenty of force is exerted on the steel rack, and as such, the steel rack should be well supported with steel angle brackets, not extending beyond 500mm apart from each bracket. This is why Nylon rack/ Razz Rack should not be used with Centurion D6 Smart sliding gate motor systems. the gate motor was then tested for smooth and proper operation. After this, a anti tamper alarm system was fitted inside the gate motor. This anti tamper alarm was then connected wirelessly to the armed response radio. this anti tamper system was tested and found to be working great. now, there is a added security measure, which will prevent the gate motor from being stolen. The spacing between the gate motor pinion gear and steel rack is very important to prevent slippage. The Centurion D6 Smart sliding gate motor has been build to operate 250 000 cycles, thus the life span of the Centurion D6 Smart sliding gate motor is between 15 to 20 years. Proper maintenance is required to achieve all of this. Call the experts in Centurion Smart gate motor installations on Pottie 083 778 2288 or Amanda 083 719 2250 Smart Gates are specialists in Centurion Smart sliding gate motors. Smart Gates have 21 years experience in the installations/ repairs/ maintenance of all sliding and swing gate motor systems. all repairs are effected on site, thus down time for gate motor repairs is hours and not days and weeks. centurion gate motor parts are available easily which also prevents down times of gate motor systems. Don't delay, call the experts today!! for more information check out: https://www.smartgates.co.za or https://www.exquisitesecurity.co.za and: https://smartgates.co.za/centurion-sm...