Basic Installation - Part 1 of 3

Watch Mike Sandman Install 4 KSUs! This is as close as it gets to working with a Journeyman while he builds the frames for four different phone systems - but this Journeyman gives you tons of tips as he goes. An Apprentice can get years of experience building frames... In 6 Hours of Training! A Training Video is actually better than working with a Journeyman, who's not going to stop and explain stuff to you. If you didn't understand something just hit the REWIND button, and watch it over as many times as you need to. Grab some cable and blocks, and practice as you watch this Video. You should be able to go out and install a phone system after watching this Video! NOTE: This Video doesn't include programming information, so you'll have to know how to program the system you install. 4 Phone Systems are Installed: The customer bought a new fully modular phone system, which we install from scratch. Then he upgraded to a system with modular jacks for the COs, but an AMP connector (25 pair) for the stations. Then he upgraded to an Altigen PC based phone system, which uses a special 25 pair connector for both the COs and stations. Finally, the customer upgrades to a 3Com NBX IP based phone system, where the COs and T1 connect with modular jacks, and the stations connect to a 19" rack mounted Ethernet hub or switch and patch panel, just like PC workstations. Learn to do it right... Neatly: 66M & B Blocks 66 & Krone RJ21Xs for COs Cross Connects MDFs House Cans Correcting Wiring Errors on Frames Octopus Cables Patch Panels Self Amplified Horns Installing a Door Station Lots and lots of TIPS! 110 Blocks Dressing Station & KSU Cables Drip Loops IDFs Splicing Cables How to Stretch Wire! Harmonicas Crimping Mod Plugs Music on Hold (MOH) Testing Stations and Trunks at Cutover