This Top Is Made From Ripped Jeans!

"The measurements mentioned in the video work for approximately sizes 38 to 42. If you are smaller or larger than this range, adjust the measurements according to your body. First, measure 45 cm up from the bottom of the T-shirt, mark a line, and cut along the line. Also, cut two 3 cm-wide strips from the top of the T-shirt. Mark the armhole and cut it out as well. Fold the edges of the armhole inward by one layer and sew them. Then sew a row of stitches with a long stitch length along the top edge of the T-shirt so that we can gather the fabric by pulling the thread. Use an old pair of jeans for the top section and for the flowers on the straps. If you cut the jeans exactly as shown in the video, the original center seam of the jeans will fall in the middle of this piece, so it won’t ruin the appearance of your top. Fray the top edge of the denim piece slightly, then attach the folded edge of the T-shirt to the denim piece and sew them together. Cut off four belt loops from the jeans and attach them to the edges of the denim piece. The top straps will pass through these belt loops. Cut the flowers and leaves from the denim fabric. First, secure them in place with fabric glue or pins, then sew them on. Using hot glue will make the process much easier. Just keep in mind that you should use very little glue—only enough to hold the two layers of fabric together so you can sew them easily. If you find it difficult to control the amount of glue, use another type of fabric adhesive or simply baste the pieces together. Thread the finished straps through the denim belt loops. Adjust the straps to fit comfortably on your shoulders, then tie them in place. And now, instead of an ordinary, basic T-shirt, you have a unique and stylish designer top! 😍"