CMMT-MP | Commissioning with Siemens PLC | SinaPos function block

The Festo tutorial is about commissioning the CMMT-MP Festo controller. This video shows you how to configure the CMMT-AS with siemens PLC using SinaPos function block. Chapters: 00:00 Title 00:16 Parts list, Products and software 00:22 Downloading the GSDML file from the festo website 01:05 Creating new project 01:25 Configuring the PLC 01:45 Configuring the IP address of the PLC 02:01 Installing the GSDML file 02:52 Configuring the CMMT-AS 04:56 Assigning device name to the CMMT-AS drive 05:58 Importing the library 06:19 Importing the function block 08:20 Basic functions with SinaPos function block 13:00 Diagnostics --- Application Note about this topic: CMMT-AS-...-S1 https://www.festo.com/us/en/support-p... SinaPos Library 00:58 to 01:04 SIMATIC Communication blocks for SINAMICS Drives (DriveLib / LDriveLib) - ID: 109475044 - Industry Support Siemens --- Products shown in the video: 8143164 Servo drive CMMT-AS-C4-3A-MP-S1 4325822 Assortment of plugs NEKM-C6-C16-S 8070984 Operator unit CDSB (optional) CDSB-A1 3012492 Toothed belt axis EGC-70-300-TB-KF-0H-GK 5251388 Motor cable NEBM-M23G15-EH-2.5-Q10N-R3LEG14 1456610 Mounting kit EAMM-A-L38-60H 2297686 Gear unit EMGA-60-P-G3-EAS-60 5242199 Servo motor EMMT-AS-60-S-LS-RMB --- Questions or feedback? Contact us. https://www.festo.com/contact --- Festo website: Visit us. https://www.festo.com --- Festo Service: The channel for everything to do with service and support. Quickly and easily commission, configure, operate and repair Festo products. The tutorials from Festo Service will help you! --- Safety instructions: Before, during and after the work, all guidelines, rules and regulations applicable in your own country must always be observed. Installation (including software), in particular for demonstration purposes, repair and commissioning must only be carried out by qualified, trained and instructed specialist personnel and in accordance with the operating instructions for the products. All installations, maintenance and repair work must only be carried out when switched off. All energy supplies must be permanently interrupted. During the work, some protective equipment might be put out of service. These must be properly reinstalled immediately after completion of the work, put into operation and checked for function! It is imperative that safety instructions and the instructions for handling the product are fully read, understood and adhered to during the work before starting work! When working on the products, the applicable regulations regarding occupational health and safety technology as well as all specifications of the operating instructions and, if applicable, written repair instructions must be observed. If you have any questions or uncertainties, please contact Festo SE & Co. KG directly and do not continue the work until clarification.