FlySky FS-i6 Firmware Update for a Bait Boat Autopilot — Step by Step

How to install the new firmware on a FlySky FS-i6 transmitter so it works with a bait boat autopilot. Two firmware files, the cable, the update mode and the flash itself — every step, start to finish. There are two versions of the firmware: the graphic one, for a boat with a depth sounder fitted to the autopilot, and the standard one without graphics for a boat without a sounder. What you need: batteries in the transmitter, the special cable into the socket on the back, the COM port set for that cable, and the updater with the .bin file. 0:00 New firmware for the FlySky FS-i6 0:17 Two versions — with graphics or standard 0:31 Unzip the archive 0:39 What is inside the folder 0:59 What you need before you start 1:13 The stock firmware 1:24 Update mode — two switches, then power on 1:42 Run the updater — press Y 1:54 Press Enter — it flashes by itself 2:10 Check the new firmware version 2:19 Done 2:27 Next video: the settings Settings come in the next video. Subscribe so you don't miss it. #flysky #fsi6 #baitboat #firmware #carpfishing #rc