Junction box for AVEVA E3D in PML Console: a full tour in real time

A junction box for AVEVA E3D, built in PML Console from start to finish, at real speed and nothing cut. The page writes the PML commands; the 3D view and the model tree on the right show what will land in the database, before anything is pasted into E3D. In this video: turning the box in 3D and the view buttons; the size by dragging a field, by the arrows and by typing; the lid and the front side; cable entries on the bottom face, six in a row in two rows, then three in a row with a smaller diameter; the whole group moved right and left, up and down, and back to the centre in one click; a face on top, a face on the west moved over to the east and removed; the code for the Commands window; and the built-in walkthrough «How it works», which fills the form step by step and puts it back as it was. The box tool has been built in AVEVA E3D on test runs: EQUI, body and lid, cable entries as cylinders in their own SUBE, with a MARKDB mark first so UNDODB takes it all back. 0:00 The junction box and the 3D view 0:35 Size: drag, arrows, typing 0:53 Lid and the front side 1:14 Cable entries on the bottom face 1:26 Three in a row, a smaller diameter 1:40 Moving the group: right and left 1:59 Up and down, back to the centre 2:22 A face on top 2:43 A face on the west, moved east, removed 3:22 Wall off, the finished box 3:43 The code for E3D 3:57 How it works: the built-in walkthrough More about the tool: https://bracketbim.github.io Telegram: https://t.me/bracketbim Music: «Зелёное течение 2» — Zvukogram.com #AVEVA #E3D #PML